s witching spark gap series/type: ordering code: ssg3x-1 b88069x0260xxxx date: 22.02.2005 version: issue 0 6 ? epcos ag 2015. reproduction, publicati on and dissemination of this publicatio n, enclosures hereto and the information contained therein without epcos' pr ior express consent is prohibited. epcos ag is a tdk group company.
important notes the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our pr oducts for certain areas of appl ication . these statements are based on our knowled ge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons , it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product specification is suitable for use in a particular custom er application. 2. we also point out that in individual cases, a malfunction of electronic components or fail ure before the end of their usual servi ce life cannot be completely ruled out in the current state of the art, even if the y are operated as specified. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must theref ore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitr y or redundancy) that no injury or damage is su stained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-specific notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales offices. 5. we constantly strive to improve our products. consequently, the pro ducts described in this publication ma y change from time to time . the same is true of the corresponding product specifications. please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . consequently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the ?general terms of delivery for produ cts and services in the electrical industry ? published b y the german electrical and electronics industry association (zvei) . 7. the trade names epcos, alu-x, ceradiode, ceralink, cerapad, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, exocore, f iltercap, formfit, leax ield, miniblue, minicell, mkd, mkk, motorcap, pcc, phasecap, phasecube, phasemod, phic ap, pqsine, siferrit, sifi, sikorel, silvercap, simdad, simic, si mid, sineformer, siov, sip5d, sip5k, tfap, thermofuse, windcap are trademarks registered or pending in europe and in other countri es. further infor mation will be found on the internet at www.epc os.com/trademarks.
switching spark gap ssg3x-1 ordering code: b88069x0260xxxx a) kb ab e / kb ab pm issue 06, 22.02.2005 page 1 of 3 features applications extremely long life time ignition of hid lamps for video projection stable performance over life insensitive performance against variations in temperature very low switching losses very short breakdown time high reliability by robust design rohs compliance * footnotes see page 2 nominal breakdown voltage v n 3000 v initial values 2) static breakdown voltage v s 1) first ignition value v s, fte after 24 hours in darkness following ignition values v s, fiv ? 3900 2550 ... 3540 v v electrical life time 3) breakdown voltage v b first ignition value v b, fte after 24 hours in darkness following ignition values v b, fiv ? 4200 2400 ... 3600 v v switching operations at 0 ... +100 c 1 000 000 ignitions test circuit parameters open circuit voltage v 0 loading resistance r discharge capacitance c inductance l discharge peak current i p 4200 4000 1.5 7.5 50 v k ? nf h a general technical data insulation resistance at 100 v early ignition values below 2400 v breakdown time maximum switching frequency weight > 100 ? 1 ? 50 400 ~ 2 m ? % ns hz g marking, red 3000 yy o 3000 - nominal voltage yy - year of production o - non radioactive
switching spark gap ssg3x-1 ordering code: b88069x0260xxxx a) ? epcos ag 2002. reproduction, publicati on and dissemination of this data sheet, enclosures hereto and the information contained therein without epcos' pr ior express consent is prohibited. purchase orders are subject to the general conditions for t he supply of products and services of the electrical and electronics industry recommended by the zvei (german el ectrical and electronic manufacturers' association), unless otherwise agreed. kb ab e / kb ab pm issue 06, 22.02.2005 page 2 of 3 a) xxxx = s102 (100 pcs. on 5 taped stripes) = t502 (500 pcs. on tape and reel) 1) at delivery aql 0,65 level ii, din iso 2859 2) page 2, fig. 1 and 2 3) page 2, fig. 3 and 4 fig. 4: explanation of measurands fig. 3: qc- test circuit (sampling inspection at 25 c) dut l c v o r v b v n 10 s 1 s t i early ignition v b, fte v b, fte range of v b, fiv v b t fig. 1: qc- test circuit (100% outgoing inspection) fig. 2: explanation of measurands dut icu 0,22 ? f 51k ? i = const v s dut device under test icu ignition control unit (sensitivity 10 .. 30 ? a) discharge current 10 ? 20 ma v s, fte v s v n -v n v s, fiv dv s /dt ~ dv n /dt t
switching spark gap ssg3x-1 ordering code: b88069x0260xxxx a) ? epcos ag 2002. reproduction, publicati on and dissemination of this data sheet, enclosures hereto and the information contained therein without epcos' pr ior express consent is prohibited. purchase orders are subject to the general conditions for t he supply of products and services of the electrical and electronics industry recommended by the zvei (german el ectrical and electronic manufacturers' association), unless otherwise agreed. kb ab e / kb ab pm issue 06, 22.02.2005 page 3 of 3 not to scale dimensions in mm non controlled document
|
